Add a standalone bidet, bidet seat, or full washlet to your bathroom. DeCicco Property Group handles the plumbing, electrical, and finish work in Hammonton, Egg Harbor Township, and Vineland.
Bidets used to be a European fixture. Today they show up in newer Hammonton homes, retirement remodels, and any bathroom where comfort and cleanliness rank above tradition.
DeCicco Property Group installs standalone bidets, electric bidet seats, and full washlet toilets as part of our bathroom remodeling services across South Jersey.
Most installs go into existing bathrooms with no demo. We add a GFCI outlet behind the toilet, run a cold-water tee, and bolt the unit to your current toilet or to its own footprint on the floor.
Call us if you are upgrading after a hip replacement, building a new primary suite, or just tired of buying toilet paper.
Adding a bidet seat or washlet to an existing toilet is one of the simplest remodel upgrades we do. Most projects finish in a single visit.
First we check the toilet itself. Bidet seats fit most elongated and round bowls from major brands, but we measure mounting hole spacing and bowl size to be sure your chosen model lines up.
Next we look at the wall outlet. If there is no outlet within four feet of the toilet, we run new wiring from the nearest GFCI circuit or pull a new circuit from the panel. In tile bathrooms we run the wire through the attic or basement when possible to avoid surface conduit.
After the electrical is ready, we install the bidet seat. The new mounting plate replaces the existing seat hardware. The T-valve goes between the toilet tank and the cold supply, with one branch feeding the seat.
We test the seat through every function before leaving, water pressure, temperature, drying, and any remote pairing. You get a quick walkthrough of the remote and the user manual.
Bidet is a broad term. The right pick depends on your bathroom layout, your budget, and how many features you want.
A standalone bidet is a separate fixture that sits next to the toilet. It needs its own hot and cold water supply, drain line, and floor footprint. We install these mostly in larger remodels or new construction in Hammonton.
A bidet seat replaces the standard seat on your existing toilet. It taps into the cold-water supply on your tank and plugs into a nearby outlet. Basic models cost a few hundred dollars and install in under two hours. Non-electric versions spray cold or pressure-tempered water without electricity, a good entry option when running a new outlet would be expensive.
Electric washlets, like the TOTO WASHLET line, add heated seats, warm water, warm air drying, deodorizer, and remote control. They need a GFCI outlet within four feet of the toilet.
Smart toilets combine the bidet, seat, and toilet into a single unit. They take up less space than a separate bidet, give you the most features, and require both a dedicated water line and a 120-volt outlet.
Most bidet installs run into the same two questions. Is there an outlet near the toilet, and is the cold-water shutoff easy to tap?
Electric bidet seats and washlets need a grounded, GFCI-protected 120-volt outlet. The factory power cord is roughly four feet long, so the outlet has to sit on the wall behind or directly beside the toilet.
Tankless heated models pull peak loads close to 1500 watts. We put these on their own circuit when the local panel allows. Tank-style models run lower and share a circuit with other small bathroom loads fine.
Plumbing is the easier half. We tee off the cold-water line that feeds the toilet, add a shutoff valve, and connect the bidet supply hose. No new drain is needed for seats and washlets, the bowl uses the toilet drain.
Standalone bidets are a bigger job. They need both a hot and cold supply, a drain, and a vent. We open the wall behind the toilet area, run the new lines, and patch the wall to match before tile or paint.
Hammonton building code follows the New Jersey Uniform Construction Code. We pull permits for any new outlet, new drain, or new water supply line and schedule the inspection.
Call DeCicco Property Group at (609) 956-4419 or request a free consultation. We install bidet seats, washlets, and standalone bidets in Hammonton, Egg Harbor Township, and Vineland.
Most bidet installs land on the existing toilet, so the footprint does not change. Standalone bidets are the exception and require careful layout.
A standalone bidet needs roughly the same floor space as a toilet, around 30 inches wide by 24 inches deep. Most New Jersey code allows 15 inches from the center of the fixture to any wall or adjacent fixture, with 21 inches of clear space in front.
In smaller Hammonton bathrooms the bidet seat or washlet is usually the only option. Adding a second fixture eats space that a vanity, linen closet, or walk-in shower needs more.
Standalone bidets fit best in primary suites and larger guest baths where the toilet sits in its own water closet or alcove. We use the same wall for plumbing access whenever possible to keep cost down.
If you are remodeling and want a smart toilet or washlet, plan the outlet location during framing. Rough-in is much cheaper than adding wiring after tile.
Bidet installs cross two trades, plumbing and electrical. A clean job needs both done right and inspected together. Here is why Hammonton homeowners trust our team.
We hold New Jersey licensing for both trades. No coordinating between two contractors and no finger-pointing if something needs a tweak.
We can run a new GFCI circuit, pull a tap from an existing GFCI, and tile-patch the wall after. Most washlet installs need new outlet work, this is the part that catches most homeowners off guard.
We install every major brand. If you have already picked your unit, we install it. If you have not picked yet, we walk you through the right model for your toilet and bathroom.
Standalone bidets, new outlets, and new water lines need permits in Hammonton. We pull the paperwork and schedule the inspector so the work meets New Jersey code.
We live and work in the Hammonton area. Our reputation depends on the quality of every install we complete. Our portfolio includes bidet seat and washlet installs across Hammonton, Egg Harbor Township, Vineland, and the surrounding South Jersey communities. Call (609) 956-4419 or request a free consultation online.
A standard bidet seat install on an existing toilet in Hammonton takes 2 to 3 hours, assuming an outlet is already in place. Adding a new GFCI outlet brings it to a half-day job.
Tank-style heated bidets share a 15-amp GFCI circuit with other small bathroom loads safely. Tankless instant-heat models pull more peak power and should sit on their own circuit when the panel allows.
Most bidet seats fit elongated and round bowls from Kohler, American Standard, TOTO, and other major brands. We measure your bowl, mounting hole spacing, and tank style before ordering. Call DeCicco Property Group at (609) 956-4419 to book an in-home evaluation.
Full toilet replacements, including smart toilets and washlet-ready bowls, with proper venting and supply lines.
Bidets, grab bars, walk-in showers, and other upgrades for aging-in-place bathrooms in Hammonton.
Compact half-bath renovations with smart toilets, bidet seats, and stylish vanities for guest bathrooms.
